How to Keep Your Drains Clean Without the Use of Chemical Drain Cleaners
Keeping your drains clean is important to maintain your home’s plumbing system. Luckily, there are several effective ways to do this without chemical drain cleaners.
A common method involves using baking soda and lemon juice. This can clear clogged drains and leave your home with a fresh citrus smell. Contact Emergency Plumbers Aurora CO now!
Clogged drains are a real pain. It only takes a little bit of hair, soap scum, and garbage to block a kitchen or bathroom drain – but it can add up over time. You can often avoid a nasty drain clog by being careful what you put down your drains and cleaning them periodically. But a professional should be called in if the problem is too big for DIY. Whether it’s a clogged bathroom sink, bathtub, or kitchen drain, there are several ways to get things flowing again.
First, try removing the P-trap underneath the sink and cleaning it. This should remove most of the clogs, but it may not be enough for some serious clogs. If that doesn’t work, a plumber snake (also known as a drain auger) should be used to clear the clog. These are long springs with a corkscrew end that you feed into the pipe until it hits the clog. Then, it can either break up the clog or just wrap around it.
Another option is to use a natural drain cleaner that dissolves organic waste, such as food scraps and grease. This is slower to work but safer for you, your pipes, and the environment than chemical cleaners.
One of the most popular ways to clean and unclog a drain is to pour baking soda and vinegar down the drain. This method also eliminates odors and freshens your drain openings and lines. If you’re dealing with a more stubborn clog, a cup of hot, boiling water down the drain can loosen it.
Homeowners are less familiar with a second effective method for unclogging a drain – hydro-jetting. This involves putting a hose with a specialized nozzle down the drain and creating a pressurized water stream that eliminates grease, other kinds of buildup, and even tree roots. Once the clog is gone, you can use the nozzle to flush out the remaining gunk and clean your drain opening. Then, you’re ready to use your sink or tub again.
Chemical drain cleaners are available as liquid, gel or powder and break down hair, food, grease and other organic materials that build up in a drain. They’re marketed as quick, easy solutions to stubborn blockages and are sold in hardware stores and big box retailers.
These products typically contain sulfuric acid, hydrochloric acid or other strong chemicals that react with the material in a drain clog to create heat and gas, dissolving the clog. They’re effective against most organic clogs but may require repeated use or high concentrations to be successful. The strong chemicals in these cleaners are dangerous to touch and can irritate your skin, eyes, nose and throat if it comes into contact with them. Long-term exposure can also aggravate asthma and other respiratory conditions. In addition, these chemicals can damage your pipes, especially older or plastic ones, if they come into contact with them.
The acid in these cleaners can corrode the metal in your pipes, leading to leaks or broken pipes down the line. They can also dissolve the plastic in your drain pipes, causing them to degrade or crack over time. Chemicals in these cleaners can also seep into groundwater and contaminate it, harming wildlife and poisoning plants.
Caustic drain cleaners have a much higher pH than acidic cleaners and are made of lye or potash. They work similarly to acidic cleaners but are better suited for breaking down hardened debris like hair or grease. They’re less effective against soft clogs but can be used in conjunction with mechanical drain cleaning tools to improve their effectiveness.
Enzyme drain cleaners don’t use chemicals but break down clogs using bacteria or enzymes that digest organic material. They’re slower than chemical cleaners but can be very effective against long-term or severe clogs.
Most reputable plumbers advise against the use of chemical drain cleaners due to their potential damage to pipes and health risks. If you must use them, follow the product instructions carefully and always wear rubber gloves, goggles and a face mask to protect yourself from harmful fumes. Regular drain cleaning with hot water and nonchemical methods is the best way to prevent clogs from occurring in the first place.
You do not think about your home drains until they don’t work. When a toilet, shower, or sink becomes slow to drain or completely blocked, it’s often the result of an organic buildup of food scraps, hair, soap scum, and other debris that can cause major problems for your plumbing system.
Store bought drain cleaners use a chemical reaction to break down and dissolve blockages. They may work through a large clog, but they can also damage your pipes’ material and surface over time. Plus, they’re dangerous for your health if they spill onto your skin or if you inhale their fumes.
A plunger uses air pressure to break up or dislodge a clog, and it can be more effective at cleaning out small clogs than liquid drain cleaners. However, you’ll need to be careful when using a plunger because it can damage your pipe walls if used improperly.
If you’re dealing with a serious clog that won’t respond to plunging, it’s time to call in the pros. A plumber will be able to remove it using professional tools such as a snake, drain auger, or hydro jets. These methods are more effective than liquid drain cleaners and won’t damage your pipes.
It’s best to prevent clogs by limiting what you put down your drains. Be sure to dispose of food scraps, grease, oils, and fats properly, and never put paper products down the drain or garbage disposal. If you do accidentally drop something down the drain, such as a metal fork or spoon, rinse it off and recycle it rather than throwing it away.
You can do your part to keep your drains clean by scheduling professional drain cleaning services a few times a year. This will help you avoid major clogs and keep your plumbing working as it should. If you’re experiencing slow or blocked drains, contact Smiley Drain to schedule a professional inspection. Our experienced technicians can recommend the right solutions for you and get your home’s drains back to normal quickly!
Sewer systems are designed for ease of operation and maintenance. They usually include relatively small-diameter pipes that are buried under the ground and constructed of vitrified clay, asbestos cement or concrete; cast iron or steel for larger systems; or ductile iron for force mains. Joints between pipe sections must be tight enough to prevent leakage of sewage or groundwater into the pipeline, and access points called manholes are located periodically over the lines for cleaning, inspection and repair.
Since sewage is carried downhill by gravity, the main sewer lines are often routed in low-lying areas to minimize their elevation above grade. When the line reaches its destination, it’s pushed through a series of increasingly larger pipes until reaching the treatment plant. For buildings that do not connect to the main sewer, pumps or lifts may be used to move the wastewater.
Clogged, or “backed up” sewer lines are a common and dangerous problem. While some clogs are caused by grease, soap scum and hair that find their way down drains, many are the result of improper use or care of plumbing fixtures and drains. The best defense against a clogged sewer line is to know the warning signs and practice preventative maintenance.
Sewage Line Repair – What You Need to Know
The humble sewage line is out of sight and out of mind for many homeowners. That is until it starts causing issues like backups and unpleasant odors in the home.
Luckily, many options for sewer repair can fix problems like cracks, holes, or collapsed sections in the pipe without having to dig large trenches across the property. Contact Plumber Topeka KS for professional help.
Cured-in-Place Pipe (CIPP) sewer line lining is an effective way to rehabilitate old, damaged or leaking pipes. This method of sewer repair can be used on small sections of pipe or for entire long runs, depending on design considerations. It is typically performed without the need for excavation. CIPP is also much quicker and more cost-effective than traditional pipe replacement.
CIPP is a relatively new technology. It was first developed in the mid-1980s when English agricultural engineer Eric Wood created a new duct inside an existing air duct on his mushroom farm to address a persistent leak. Since then, the process has become a popular option for repairing aging water and sewer lines, particularly for municipalities seeking to avoid the time-consuming, costly and disruptive excavation required by other methods.
The CIPP procedure involves inserting a soft, resin-soaked liner into the existing pipe, inflating it with air and then heating it to harden. The resulting pipe resembles a new pipe and can last up to 50 years. It also provides a seamless, jointless interior and eliminates infiltration and exfiltration.
Despite the popularity of CIPP, this method is not without its drawbacks. It can be difficult to work safely in tight spaces and requires heavy preparation before a project begins. For example, the existing pipe must be surveyed, cleaned, equipped with a by-pass pump (if necessary), pre-grouted and otherwise prepared before the CIPP liner can be installed. In addition, the cured epoxy resins used for the liners are toxic and can pose health risks to workers and nearby residents.
According to Purdue University researcher Andrew Whelton, CIPP fumes consist of a soup of partially cured plastic, liquified resin and volatile organic compounds. The vapors can be inhaled or ingested and are known to cause a variety of illnesses, including headaches, dizziness, nausea and, in severe cases, death. In fact, the odor from a recent CIPP project in Spooner, Wisconsin, was so pungent that it prompted residents to evacuate their homes.
The Occupational Safety and Health Administration regulates the CIPP industry with regards to worker safety. But it doesn’t actively monitor work sites or require that contractors follow safety protocols to prevent harmful fumes from escaping into the environment. As a result, workers are exposed to potentially dangerous conditions with little protection or awareness.
Pipe Relining
The underground pipes that ferry waste and water to and from your home are susceptible to damage due to ground movement, root infiltration, blockages and more. Repairing these pipes without digging up your yard is possible with a pipe relining service, which essentially creates a brand new pipe inside of the old one.
This process is a more cost-effective, less disruptive solution to traditional sewer line replacement. It can even be used in places where a full sewer pipe replacement would not be feasible.
To start the pipe relining process, our team will conduct a video drain inspection to determine the root cause of your problems. Once the issue is determined, our experts will scour the interior of your pipes using mechanical and hydro-jetting technologies to remove any obstructions that may be causing a reduction in your pipe’s diameter. A remote camera inspection will also be conducted to ensure the pipes are ready for relining.
Once the pipes are clean and free of any obstructions, a flexible, resin-coated liner will be inserted into your damaged pipe. The liner will then be inflated with air or water pressure until it is firmly seated in the pipe. The lining will then be hardened with an epoxy resin, creating a durable, corrosion-resistant pipe within your existing one.
The relining process is quick, typically completed in just a few hours. However, we do ask that you avoid putting any items down the drains during this time to prevent clogs or other issues. After the relining has been installed, our team will test your plumbing to make sure everything is working as it should.
Keep in mind, though, that relining isn’t a permanent solution. If your pipes have sustained extensive or prolonged damage, a full sewer pipe replacement may be necessary. If you’re interested in learning more about our pipe relining services or are experiencing consistent backups and other signs of pipe damage, contact our expert plumbers for more information today. We look forward to assisting you with all your plumbing needs!
Spot Repair
As the name suggests, spot repair is a maintenance technique that addresses specific areas of damage or distress in asphalt pavements. It is a more efficient and economical option than full-depth repairs or overlays. It also extends the lifespan of pavement and improves safety. In addition, addressing localized damages promptly prevents them from spreading and causing more extensive damage to the pavement structure.
It is also important to note that spot sewer repair should only be performed on pipes that are in good condition and not clogged or damaged. If a pipe has significant structural issues, it should be replaced or repaired with an alternative method such as trenchless sewer line replacement.
A high-definition camera inspection can reveal a variety of physical defects in the pipe, including cracks, misalignment, pipe offset, bellying, and root intrusion. Depending on the findings, the contractor will then recommend either spot repair or pipe replacement.
Spot repair is a process that uses a specific putty with excellent filling power, such as PP/1440 light putty. This type of putty is easy to mix and apply, with a short sanding time, resulting in a smooth finish. The process allows repairing multiple parts simultaneously, reducing working time and product consumption.
The use of spot repair techniques makes a so-so car a nice-car again, without the cost and inconvenience of replacing all of the original paint. The process can be done at a body shop, or by the do-it-yourselfer. Whether the goal is to take an old vehicle to Pebble Beach, or just keep it running and looking good for years to come, this is a great way to achieve that goal with minimal effort.
Similarly, a spot repair approach can bring a clogged drain back to normal. It is a non-invasive repair that does not require excavation, and it is much less expensive than an entire pipe replacement. This method is also better for the environment than digging and hauling away old pipe.
Unlike excavation, spot repair can be used on all types of residential and commercial properties. It is not invasive and does not require any digging, which makes it ideal for homes and businesses with shallow drains that are close to the surface. The process is also a lot less expensive than pipe replacement and can save customers thousands of dollars in repair costs.
Excavation and Replacement
While many plumbers prefer the less-invasive trenchless sewer repair methods, sometimes excavation services are necessary. If your sewage line is severely damaged or you’re experiencing repeated backups, these may be signs that it’s time for an overhaul. Your sewer line is an essential part of your home’s plumbing system, and a broken or clogged one can cause serious problems for your entire house.
Sewer lines are typically located underground, making them difficult to access when they need repairs. Fortunately, there are several sewer repair techniques that can be used to minimize the amount of digging required.
Trenchless techniques like reline and CIPP can provide you with a new sewer line without the need for extensive excavation work. However, when these options aren’t available, sewer line replacement and excavation services can be the best solution for addressing severe damage or a persistent clog.
When it comes to traditional excavation, your plumber will use a digging machine to uncover the damaged line and determine how to proceed with the repair or replacement process. Once the work is complete, your plumber will backfill the area and restore the ground surface.
The most common type of excavation for sewer line repair is external excavation, which involves tunneling down to the pipes from an outdoor location. This can be disruptive to landscaping and other exterior features, but it’s often the only way to get a clear picture of what’s happening inside the pipes.
An experienced plumber will know how to dig safely and efficiently, minimizing the impact on your property. Before starting any work, they will also ensure that all utility lines are marked so that they don’t accidentally cut or disturb any wires or hydrants.
Getting your sewer lines repaired or replaced as soon as you notice any issues is important to prevent costly damage and keep your home safe. Luckily, there are now several minimally invasive repair options that can save you both money and hassle. Contact a professional plumber for more information about your options or to schedule an inspection. They can help you find the right option for your situation and advise you on how to protect your home’s plumbing system in the future.