Keeping your drains clean is important to maintain your home’s plumbing system. Luckily, there are several effective ways to do this without chemical drain cleaners.
A common method involves using baking soda and lemon juice. This can clear clogged drains and leave your home with a fresh citrus smell. Contact Emergency Plumbers Aurora CO now!
Clogged drains are a real pain. It only takes a little bit of hair, soap scum, and garbage to block a kitchen or bathroom drain – but it can add up over time. You can often avoid a nasty drain clog by being careful what you put down your drains and cleaning them periodically. But a professional should be called in if the problem is too big for DIY. Whether it’s a clogged bathroom sink, bathtub, or kitchen drain, there are several ways to get things flowing again.
First, try removing the P-trap underneath the sink and cleaning it. This should remove most of the clogs, but it may not be enough for some serious clogs. If that doesn’t work, a plumber snake (also known as a drain auger) should be used to clear the clog. These are long springs with a corkscrew end that you feed into the pipe until it hits the clog. Then, it can either break up the clog or just wrap around it.
Another option is to use a natural drain cleaner that dissolves organic waste, such as food scraps and grease. This is slower to work but safer for you, your pipes, and the environment than chemical cleaners.
One of the most popular ways to clean and unclog a drain is to pour baking soda and vinegar down the drain. This method also eliminates odors and freshens your drain openings and lines. If you’re dealing with a more stubborn clog, a cup of hot, boiling water down the drain can loosen it.
Homeowners are less familiar with a second effective method for unclogging a drain – hydro-jetting. This involves putting a hose with a specialized nozzle down the drain and creating a pressurized water stream that eliminates grease, other kinds of buildup, and even tree roots. Once the clog is gone, you can use the nozzle to flush out the remaining gunk and clean your drain opening. Then, you’re ready to use your sink or tub again.
Chemical drain cleaners are available as liquid, gel or powder and break down hair, food, grease and other organic materials that build up in a drain. They’re marketed as quick, easy solutions to stubborn blockages and are sold in hardware stores and big box retailers.
These products typically contain sulfuric acid, hydrochloric acid or other strong chemicals that react with the material in a drain clog to create heat and gas, dissolving the clog. They’re effective against most organic clogs but may require repeated use or high concentrations to be successful. The strong chemicals in these cleaners are dangerous to touch and can irritate your skin, eyes, nose and throat if it comes into contact with them. Long-term exposure can also aggravate asthma and other respiratory conditions. In addition, these chemicals can damage your pipes, especially older or plastic ones, if they come into contact with them.
The acid in these cleaners can corrode the metal in your pipes, leading to leaks or broken pipes down the line. They can also dissolve the plastic in your drain pipes, causing them to degrade or crack over time. Chemicals in these cleaners can also seep into groundwater and contaminate it, harming wildlife and poisoning plants.
Caustic drain cleaners have a much higher pH than acidic cleaners and are made of lye or potash. They work similarly to acidic cleaners but are better suited for breaking down hardened debris like hair or grease. They’re less effective against soft clogs but can be used in conjunction with mechanical drain cleaning tools to improve their effectiveness.
Enzyme drain cleaners don’t use chemicals but break down clogs using bacteria or enzymes that digest organic material. They’re slower than chemical cleaners but can be very effective against long-term or severe clogs.
Most reputable plumbers advise against the use of chemical drain cleaners due to their potential damage to pipes and health risks. If you must use them, follow the product instructions carefully and always wear rubber gloves, goggles and a face mask to protect yourself from harmful fumes. Regular drain cleaning with hot water and nonchemical methods is the best way to prevent clogs from occurring in the first place.
You do not think about your home drains until they don’t work. When a toilet, shower, or sink becomes slow to drain or completely blocked, it’s often the result of an organic buildup of food scraps, hair, soap scum, and other debris that can cause major problems for your plumbing system.
Store bought drain cleaners use a chemical reaction to break down and dissolve blockages. They may work through a large clog, but they can also damage your pipes’ material and surface over time. Plus, they’re dangerous for your health if they spill onto your skin or if you inhale their fumes.
A plunger uses air pressure to break up or dislodge a clog, and it can be more effective at cleaning out small clogs than liquid drain cleaners. However, you’ll need to be careful when using a plunger because it can damage your pipe walls if used improperly.
If you’re dealing with a serious clog that won’t respond to plunging, it’s time to call in the pros. A plumber will be able to remove it using professional tools such as a snake, drain auger, or hydro jets. These methods are more effective than liquid drain cleaners and won’t damage your pipes.
It’s best to prevent clogs by limiting what you put down your drains. Be sure to dispose of food scraps, grease, oils, and fats properly, and never put paper products down the drain or garbage disposal. If you do accidentally drop something down the drain, such as a metal fork or spoon, rinse it off and recycle it rather than throwing it away.
You can do your part to keep your drains clean by scheduling professional drain cleaning services a few times a year. This will help you avoid major clogs and keep your plumbing working as it should. If you’re experiencing slow or blocked drains, contact Smiley Drain to schedule a professional inspection. Our experienced technicians can recommend the right solutions for you and get your home’s drains back to normal quickly!
Sewer systems are designed for ease of operation and maintenance. They usually include relatively small-diameter pipes that are buried under the ground and constructed of vitrified clay, asbestos cement or concrete; cast iron or steel for larger systems; or ductile iron for force mains. Joints between pipe sections must be tight enough to prevent leakage of sewage or groundwater into the pipeline, and access points called manholes are located periodically over the lines for cleaning, inspection and repair.
Since sewage is carried downhill by gravity, the main sewer lines are often routed in low-lying areas to minimize their elevation above grade. When the line reaches its destination, it’s pushed through a series of increasingly larger pipes until reaching the treatment plant. For buildings that do not connect to the main sewer, pumps or lifts may be used to move the wastewater.
Clogged, or “backed up” sewer lines are a common and dangerous problem. While some clogs are caused by grease, soap scum and hair that find their way down drains, many are the result of improper use or care of plumbing fixtures and drains. The best defense against a clogged sewer line is to know the warning signs and practice preventative maintenance.